Name: 
 

VICA - Network Study Guide 4



Multiple Choice
Identify the letter of the choice that best completes the statement or answers the question.
 

1. 

After you enter the enable password or the enable secret password, the greater than symbol changes to a(n) ______ to indicate you are in privileged EXEC mode.
a.
&&
c.
@
b.
$
d.
#
 

2. 

To enter privileged EXEC, you can type the command _______ at the prompt.
a.
enter
c.
enable
b.
activate
d.
open
 

3. 

_________ configuration mode allows you to configure the Ethernet and serial interfaces on your router.
a.
Interface
c.
Line
b.
Base
d.
Virtual
 

4. 

_________ is erasable, programmable, read only memory.
a.
EROM
c.
NVRAM
b.
Flash memory
d.
DRAM
 

True/False
Indicate whether the sentence or statement is true or false.
 

5. 

When a device sends a packet on the local segment, all other devices on that segment must receive or discard the packet.
 

6. 

When network administrators add routers to a network, they must configure those routers to operate within the network.
 

7. 

Network administrators use routers in large networks to provide packet filtering, connections between local networks, traffic control, and wide area network connections.
 

8. 

Routers operate at the Transport layer of the OSI reference model.
 

9. 

Because of Network layer addressing, routers can direct packets to both local and remote segments.
 

10. 

When configuring the router through the console or AUX ports, you first must make the physical connection.
 

11. 

User mode allows you to configure the router.
 

12. 

From the enable mode prompt (router#), you can view the router's configuration and access several other configuration modes.
 

13. 

The default host name is simply "router", which is displayed at the beginning or every prompt.
 

14. 

The content of flash memory is maintained even when the router is rebooted.
 

Completion
Complete each sentence or statement.
 

15. 

One of the main benefits of using a router is that it _________ traffic.
 

 

16. 

The Cisco ______ provides a command-line interface, which allows network operators to check the status or the router and network administrators to manage and configure the router.
 

 

17. 

Network administrators can access a router directly by the __________ or by the AUX ports located on the back of the router.
 

 

18. 

You can use the _______ port on the back of the router to connect a modem directly to the router.
 

 

19. 

The ________ EXEC mode allows a network operator to check router status, to see if the interfaces are operational, and to review several or the router settings.
 

 

20. 

You access the basic configuration mode, called _________ configuration mode, by typing "configure" at the enable mode prompt.
 

 

21. 

When configuring the router, typing "_______" will take you back one level.
 

 



 
Check Your Work     Reset Help